User Manual

Parameters:

Model Parameters

Solution Parameters

Turbulence Parameters

Solver Parameters

Transient Parameters

Output Parameters

Job control parameters are used to set up parameters directly related to numerical solution.

These parameters include

Model Parameters:

These pertain to the physical aspects of the problem to be solved (2D/3D,

Transient/Steady Sate, Laminar/Turbulent)

Solution Parameters:

These designate what kind of solution to perform ( Full CFD, No CFD, Frozen CFD)

Solver Parameters:

These let the user set the solution tolerances and solver dependent parameters.

Transient Parameters:

If a transient solution has been selected the user has top specify start time, end time and initial time step.

Turbulence Parameters:

The turbulence parameters menu allows the selection of turbulence model as well as

any pertinent data ( Characteristic length, Velocity, etc.). Zero equation, Standard K-epsilon models

are available.

Output Parameters:

These parameters control how often the output files will be generated.